Tektronix Phaser 350 User Manual
Page 187
Troubleshooting
6
User Manual
6-5
Media Tray Empty
Add paper or transparencies to the media tray.
Melting Ink
No user action required. Displayed during print jobs
that require large amounts of ink.
Processing Data
No user action required.
Ready
No user action required. The printer is ready to print.
Replace Lower
Media Tray
Insert the lower media tray.
Replace
Maintenance Tray
Open the front cover, remove the maintenance tray,
and replace it with a new one.
Replace Media Tray
Insert the standard media tray.
Replace Upper
Media Tray
Insert the standard media tray.
Standby
Press
Wakeup
or send a print job to bring the printer
to
Ready
.
Tektronix V:
No user action required. Wait for a period of time.
Unlock Transit
Restraint
Unlock the transit restraint on the right side of the
printer before sending print jobs.
Upper Media Tray
Empty
Add paper or transparencies to the standard media
tray.
Waiting For Manual
Feed
Insert paper or transparency in the manual feed slot.
Waiting For Paper
The print job specifies paper but the printer detects that
the transparency tray is installed. Load paper in the
media tray and press
OK
.
Waiting For
Transparency
The print job specifies transparency but the printer
detects that the paper tray is installed. Load
transparency in the media tray and press
OK
.
Warming Up
No user action required. Wait for a period of time.
Waste Tray Full
Open the front cover, remove the maintenance tray and
empty the waste tray.
Front panel messages (cont'd.)
Message
Action