Tektronix Phaser 350 - Manual (Page 163)

Caring for Your Printer 5
User Manual 5-23
5. There are two sets of lower paper-feed rollers. One set of rollers is
rubber; the other set is white plastic. The rubber lower rollers are
located below the maintenance tray; the white plastic rollers are
located on the inside of the front cover.
To clean the lower rubber-feed rollers, use either the pre-packaged
alcohol-soaked cloth or fold a lint-free cloth into a two-inch square
and soak with alcohol.
Place and hold the cleaning cloth on top of each lower rubber
roller, pressing to create pressure against the roller.
Press the middle finger of your other hand flat against a lower
roller and turn the roller using the entire length of your finger.
The lower rubber roller should rotate four or five complete
revolutions to ensure proper cleaning.
Scrub each roller thoroughly. If the cloth becomes dirty, discard it
and use another.
9682-13