Tektronix Phaser 350 - Manual (Page 70)

2 Getting Set Up
2-54 Phaser 350 Color Printer
Setting up the Phaser 350 printer driver
The Phaser 350 driver is a Tektronix-modified version of Apple's
LaserWriter 7.1.2 printer driver. Use the Phaser 350 driver if you are using
System Software 6.0.7, or 7.0 and later.
1. Install the printer’s software as described on page 2-53. Choose
Easy Install
to install all of the necessary software, or select
Phaser 350 Driver in the Custom Install window.
2. Select Chooser from the Apple menu.
3. Click on the Phaser 350 printer driver icon on the left side of the
Chooser
. A list appears with the printers you have connected to
your Macintosh or printers that are available on a network. (If the
printer driver icon does not appear, Restart your Macintosh, and
repeat the printer driver installation procedure; also check the
cable connections on your computer and printer.)
4. Click on the Zone your printer is in. See your network
administrator if you have questions.
5. Click on your Phaser 350 printer in the list of printers on the right
side of the Chooser.
6. Close the Chooser by clicking its close box.