Tektronix Phaser 350 - Manual (Page 158)

5 Caring for Your Printer
5-18 Phaser 350 Color Printer
1. Load the upper media tray with sheets of clean, high-grade paper.
2. When the printer is on and the Ready message or the printer’s
name appears in the front panel, press the Clean button. The
printer displays the first selection in the menu:
Clean:Light Stripes
<---- Clean Test
3. Press the left arrow (<---) button until the following front panel
message appears:
Clean:Ink Smears
<---- Clean Test
4. Press the Clean button. The printer displays the following front
panel message:
Warming Up
Cancel
5. After a short delay during the warm-up period, the printer begins
an automatic sequence of feeding 10 clean sheets of paper from the
upper media tray.
A front panel message indicates the number of sheets remaining to
be fed. For example:
Cleaning:Using 10 Sheets
6. When the cleaning sequence is complete, inspect the last sheet of
paper fed through the printer. If it is not clean, repeat the cleaning
sequence by pressing the
Clean button once again.
7. Return the printer to normal operation by pressing the button.
If the ink smear problem persists after running clean sheets of
paper through the paper path, refer to the following two
procedures for directions on cleaning paper feed rollers and the
paper exit path.
Exit Exit