Removing/replacing the inverter board, Removing/replacing inverter board, Removing/replacing bezel – Texas Instruments 5000 User Manual
Page 135
![background image](/manuals/213027/135/background.png)
Screws Holding Inverter
Board to Cover
Removing/Replacing Inverter Board
Step 1: Remove two
Snap On Plastic Hinge
Covers
Step 2: Remove two plugs and remove recessed screws..
Step 3: Gently pry off the
Display Bezel (held by clips)
Removing/Replacing Bezel
Figure 5-20 Removing/Replacing the Inverter Board
Field Service 5-29
This manual is related to the following products: