Texas Instruments 5000 - Manual (Page 115)

5.5 Notebook Sub-Assembly
Removal and Replacement
Procedures
The following paragraphs contain field service-level removal/replacement
procedures for the Notebook.
5.5.1 Removing/Replacing the Notebook
Battery Pack
The procedure for removing and replacing the battery pack(s) is as follows:
1. Turn off the computer.
2. Press the associated Battery Eject button, for the battery you are
removing, to the left; remove the battery pack from the unit (see
Figure 5-4).
3. Insert the replacement battery until it snaps in place.
Figure 5-4 Battery Pack Removal/Replacement
Field Service 5-9