TANDBERG Gatekeeper - Manual (Page 87)

TANDBERG Gatekeeper User Guide
Page 87 of 105
16.3.15. FeedbackDeregister
xCommand FeedbackDeregister
Deregisters the specified Feedback Expression.
All registered Feedback Expressions may be removed by issuing the command:
xCommand FeedbackDeregister 0
16.3.16. FindRegistration
xCommand FindRegistration <alias>
Returns information about the registration associated with the specified
alias
. The alias must be
registered on the Gatekeeper on which the command is issued.
See also
xCommand Locate
.
16.3.17. LinkAdd
xCommand LinkAdd <linkname>
Adds a new link to the link list with the specified nodes and pipes. The nodes and pipes must already
exist on the system.
16.3.18. LinkDelete
xCommand LinkDelete
Deletes the link with the specified index.
16.3.19. Locate
xCommand Locate
Runs the Gatekeeper's location algorithm to locate the endpoint identified by the given alias, searching
locally, on neighbors, and on systems discovered through the DNS system, within the specified number
of "hops". Results are reported back through the
xFeedback
mechanism, which must therefore be set
up before issuing this command.
16.3.20. OptionKeyAdd
xCommand OptionKeyAdd
Adds a new option key.
16.3.21. OptionKeyDelete
xCommand OptionKeyDelete
Deletes the option key with the specified index.
16.3.22. PipeAdd
xCommand PipeAdd <name>
Adds and configures a new pipe.