TANDBERG Gatekeeper - Manual (Page 80)

TANDBERG Gatekeeper User Guide
Page 80 of 105
xconfiguration SubZones TraversalSubZone Bandwidth PerCall Limit:
<1..100000000>
Per-call bandwidth available on the traversal subzone.
xconfiguration SubZones TraversalSubZone Bandwidth PerCall Mode:
Whether or not the traversal subzone is enforcing per-call bandwidth restrictions.
None
corresponds to
no bandwidth available.
xconfiguration SubZones TraversalSubZone Bandwidth Total Limit:
<1..100000000>
Total bandwidth available on the traversal subzone.
xconfiguration SubZones TraversalSubZone Bandwidth Total Mode:
Whether or not the traversal subzone is enforcing total bandwidth restrictions.
None
corresponds to no
bandwidth available.
xconfiguration SubZones SubZone [1..100] Bandwidth PerCall Limit:
<1..100000000>
Per-call bandwidth available on the indexed subzone.
xconfiguration SubZones SubZone [1..100] Bandwidth PerCall Mode:
Whether or not the indexed subzone is enforcing per-call bandwidth restrictions.
None
corresponds to
no bandwidth available.
xconfiguration SubZones SubZone [1..100] Bandwidth Total Limit:
<1..100000000>
Total bandwidth available on the indexed subzone.
xconfiguration SubZones SubZone [1..100] Bandwidth Total Mode:
Whether or not the indexed subzone is enforcing total bandwidth restrictions.
None
corresponds to no
bandwidth available.
xconfiguration SubZones SubZone [1..100] Name: <subzonename>
Name of the indexed subzone.
xconfiguration SubZones SubZone [1..100] Subnet [1-5] IP Address:
<IPAddr>
IP address used (in conjunction with the
IP PrefixLength
command) to identify a subnet to be
assigned to this subzone.
xconfiguration SubZones SubZone [1..100] Subnet [1-5] IP PrefixLength:
<length>
Number of bits of the
Subnet IP Address
which must match for an IP address to belong in this
subzone.