Enabling call transfer, Disconnecting a call – TANDBERG Gatekeeper User Manual
Page 52
TANDBERG Gatekeeper User Guide
Page 52 of 105
12.3.2.
Enabling call transfer
To enable call transfer, either:
issue the command:
xConfiguration Services CallTransfer Mode:
or go to
Gatekeeper Configuration
->
Services
and in the
Call Transfer
section, tick the
Allow call transfer
box (see Figure 23).
Figure 23: Enabling call transfer
12.4.
Disconnecting a Call
An existing call may be disconnected using the Gatekeeper by issuing the command:
xCommand DisconnectCall:
where:
index
the call index as reported by
xStatus Calls