TANDBERG Gatekeeper - Manual (Page 72)

TANDBERG Gatekeeper User Guide
Page 72 of 105
16.1.16. Zones
xstatus Zones
Returns call and bandwidth information for all zones on the system. Also shows status of the zone as a
whole and the status of each gatekeeper in the zone.
16.2. Configuration
The configuration root command,
xconfiguration
, is used to configuration the system's settings.
To list all
xconfiguration
commands type:
xconfiguration ?
To list all configuration data, type:
xconfiguration
To list the data relating to a specific configuration command, type:
xconfiguration <command_name>
To show usage information for a specific configuration command, type:
xconfiguration <command_name> ?
To set a configuration element type:
xconfiguration <command_name> param1: value1 param2: value2
Note: Remember to use the colon after naming the parameters.
16.2.1. Authentication
The
Authentication
group of commands allow you to configure parameters relating to how an
endpoint authenticates itself with the Gatekeeper.
xconfiguration Authentication Credential [1..1000] Name: <username>
Specifies the username of a credential in the local authentication database.
xconfiguration Authentication Credential [1..1000] Password: <password>
Specifies the password of a credential in the local authentication database.
xconfiguration Authentication Database:
Selects between a local database and a remote LDAP repository for the storage of password information
for authentication. The default is
LocalDatabase
.
xconfiguration Authentication LDAP BaseDN:
Specifies the Distinguished Name to use when connecting to an LDAP server. The default is an empty
string.
xconfiguration Authentication LDAP AliasOrigin:
Specifies which aliases -- from the endpoint or the database -- should be used to register the endpoint.
Defaults to
LDAP
.