Telos ZephyrExpress - Manual (Page 50)

Z EPHYR E XPRESS HARDWARE 3-9
analog POTS call, as described in Section 4 (Audio Operations). Once you’ve changed one
of these fields, press
EDIT again. Then turn the knob to re-highlight the Go! field, and
press EDIT to place the call.
If only one line is in use, it will be pre-selected when the screen appears (such as Line 2 ,
above). If both lines are in use, select which one(s) to drop. When you press EDIT , the call
will be disconnected.
w
USER NOTE!
If you press DROP while neither line is in use, ZephyrExpress will beep but
nothing else will happen. You can’t drop a non-existent call.
UTIL button
u Press UTIL to open the Utility menu, where you can access various ZephyrExpress
settings. This is fully discussed in Section 7.
HELP button
l
Press HELP to open ZephyrExpress’ context-sensitive HELP system. You’ll see various
screens, based on what you were doing when you asked for help. Here’s a typical one,
that you’d see if you pressed
HELP while the Utility Screen’s Audio menu selection is
highlighted:
If the bottom line has a downward triangle ( ), more text is available on this topic. Turn
EDIT clockwise to scroll down.
If the top line has an upward triangle ( ), there’s more
text scrolled off the top of the screen. Turn EDIT counter-clockwise to retrieve it.
When you’re finished reading, press EDIT to return to where you were when you pressed
the HELP button.
Numeric Keypad
DROP button
p
Press DROP to hang up an ISDN or analog phone call, regardless of whether you placed
it or someone else called your ZephyrExpress. The display will show the drop selection
screen: