beautypg.com

Telos ZephyrExpress User Manual

Page 29

background image

QUICK RESULTS

1-17

right.

To exit any menu, hold the E

DIT

knob in for at least three seconds...

· or, select the

icon in a submenu and tap the

EDIT

knob.

· or, hold the

EDIT

knob in and turn it to the left: each click will take you one step back

through the menu structure, until you return to the Status screen.

· or ignore the menu. After a while (which can be set in the

System

menu) it will time

out and revert to the next-highest level.

h

HOT TIP:

There’s a complete map to the menus in the front of this manual.

3:

How do I use a menu that appears locked?

Critical parameters can be locked to protect against accidental changes. When Safe Mode
is on

, SAFE

appears in red on the front panel and the message

This menu is disabled in

SAFE mode

appears when you try to open a blocked submenu. Use the

SAFE MODE

switch

on the rear panel to turn this mode on or off. A small screwdriver blade will help you
reach the switch. Don’t use a pencil to change the setting — the graphite tip might break
off, and cause a short within ZephyrExpress.

w

NOTE:

Don’t turn off Safe Mode unless you know what you’re doing. Codec settings
have to match the distant studio and ISDN ones have to agree with the phone
company. With the wrong ones, transmission will be impossible.

4:

How do I lock a specific menu?

Obviously, turning the

SAFE MODE

switch to its

On

position will lock something. But before

you use it, enter the

Utility

:

Safe Mode

submenu. You’ll see a list of ZephyrExpress

activities that can be locked. Each can be set to

Allow

or

Block

.

5:

How do I enter numbers or names?

To enter a number for any menu item or when dialing, use the keypad.

To enter individual letters in a text field, press the number key with that letter printed on
it. Tap the key repeatedly to cycle through the choices. When you see the one you want,
move to the next character by tapping another number key or turning the Edit knob
clockwise.

If you make a mistake, turn the Edit knob counter-clockwise to back up. Once you’ve
finished entering, tap the knob to confirm.