Telos ZephyrExpress - Manual (Page 184)

APPENDIX 11-17
Fax page 2 of 3
PROTOCOL: National ISDN-1
From AT&T 5Ess, Northern Telecom DMS100, and Siemens EWSD.
If you use IOC Capability Packages, please use Capability Package “S”
CO Values:
Line Type: National ISDN-1
Bearer Service: CSD/CSV on both channels
TEI: One dynamic per number
10XXX Long Distance Prefix: Yes
Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Electronic Key Tele-
phone Sets (EKTS), shared numbers, accept special type of number, intercom groups, network resource
selector (modem pools), message waiting, hunting, interLata competition, etc.
Note for EWSD running NI-97: Switch must be programmed CLID=DN
Give us:
1) Two SPID numbers, depending upon active number of B channels
2) Two Directory Numbers
PROTOCOL: AT&T Point-to-Point (Custom)
Software version 5E4.2 and above
CO Values:
Line Type (DSL class): Point-to-Point (PTP)
B1 Service: On Demand (DMD)
B2 Service: On Demand (DMD)
Maximum B Channels (MaxChan): 2
CSV Channels: Any
Number of CSV calls: 1
CSD Channels: Any
Number of CSD calls: 2
Terminal Type: A