Telos ZephyrExpress - Manual (Page 139)

8-10 SYSTEM FUNCTIONS
[]
[]
kept.
Sets the ISDN bitrate to 56kbps or 64kbps,
or keeps the current value.
Sets the audio sample rate to 32kHz or
48kHz, or keeps the current value.
You must specify all four arguments.
Example mop - l3mo br64
sr32 ¶
Set the receive mode to L3-mono, the
bitrate to 64kbps, and the sample rate to
32kHz. Leave the transmit mode alone.
passwo []
Example passwo user steve ¶
Response New password for user
level: steve
>>
Change password for current security level.
If you don’t specify a new password, this
level will accept all logins without a
password.
If the current password is “user”, this will
change it to “steve”.
ZephyrExpress confirms the new
password.
w
WARNING!
Be sure you can remember the new password. Once you change it, there is no
way to restore the original
1 . Check the response to make sure you typed the new
password correctly.
Passwords are case-sensitive.
rtc Read current time from ZephyrExpress’ real-time clock. Time will be
in the format:
30.03.1999 19:02:12, 15331 msec, 15.330856 sec,
where the first string is the date, the second is the time of day, and the third
and fourth indicate the total time since last startup.
telco none
[]
Example telco ptp ¶
Display ISDN switch type.
Select switch type. This will restart the
ISDN engine.
Sets the switch type to Point-to-Point.
version none
System software : 1.2.1
Loadset software: 2.36
Displays the current software versions.
1 Well, there possibly is... but it’s messy and will take up a lot of your time and ours.