Telos ZephyrExpress - Manual (Page 110)

MENUS 6-15
— Mon1 XMT pan Opens the Monitor 1 Send panning submenu.
— A setting Sets how the Send A bus signal is panned when Monitor 1’s A -only
routing is used.
— B setting Sets how the Send B bus signal is panned when Monitor 1’s B -only
routing is used.
— AB setting A Sets how the Send A bus signal is panned when Monitor 1’s
AB routing is used.
— AB setting B Sets how the Send B bus signal is panned when Monitor 1’s
AB routing is used.
h
HOT TIP!
ZephyrExpress’ monitor panning is a sophisticated feature designed to support
complex routing and mix-minus configurations in the field. Read about it in Sec-
tion 4, Audio.
— Mon1 RCV Pan Opens the Monitor 1 Receive panning submenu. See above.
— Mon2 XMT Pan Opens the Monitor 2 Send panning submenu. Ditto.
— Mon2 RCV Pan Opens the Monitor 2 Send panning submenu. And again.
— Audio Setups See Setups, page 6-6
ISDN menu
The first item in this menu is the ISDN Setup. See page 6-6.
— Switch Type Selects the ISDN switch protocol, and must match information given
to you by the telephone company
1 .
Ntl.I-1 National ISDN -1, the most common switch in the US.
PTP AT&T Point-to-Point; also for DMS-100 Custom ISDN.
ETS300 European ISDN
1 ZephyrExpress will not be able to communicate with an ISDN line if this information is
wrong. See section 7, ISDN, for complete details.