Telos ZephyrExpress - Manual (Page 173)

11-6 APPENDIX
L2-Mono@24 : must be set to ISO
bitstream.
L2-Stereo
: -
L2-M128 : -
G.722 : yes! ZephyrExpress
can always receive. CDQ must have
H.221 switched off in order to receive
from ZephyrExpress
• CCS CDQ2000
CDQ2000: Decoder DIP switch 6 up
(decoder independent from encoder).
L3-Mono
: -
L3-Stereo : -
L2-Mono@48 : yes!
L2-Stereo : yes!
L2-M128 : yes!
G.722 : -
• CCS CDQ2001
See CDQ2000. 48kHz sample rate.
• CCS Prima
Prima: Front panel option de-
coder/general/indep=yes
Or serial port command "din yes".
Sample rate set to 48kHz
L3-Mono
:
(some units have layer III and are
compatible)
L3-Stereo
:
(some units have layer III and are
compatible)
L2-Mono@48 :
yes!
L2-Mono@24 : yes!
L2-Stereo : yes!
L2-M128 : yes!
G.722 : yes!
• Comrex Layer-II DX-200
L3-Mono : -
L3-Stereo : -
L2-Mono@48 : yes!
L2-Stereo
: yes! Must be
switched to “Telos /CCS compatibil-
ity” mode for stereo.
L2-M128
: yes!
G.722 : Yes
• Comrex G.722 DXP and DXR
G.722 : yes! Standard G.722
only
• Dialog4 MusicTaxi
ZephyrExpress Codec: Compatibil-
ity must be set to Dialog4 .
MusicTaxi “Configuration /ISDN ac-
cept mode” must be set to ALL and
“Configuration/ISDN mode” to RI.
L3-Mono
: yes+. There will be
dropouts in the MusicTaxi to Zephyr-
Express path because of D4’s asyn-
chronous mode.
L3-Stereo
: yes+, but see above
L2-Mono@48 : ?
L2-Stereo
: ?
L2-M128 : ?
G.722 : yes?
• Dialog4 ReporterSet
L3-Mono : ?
L3-Stereo : ?
L2-Mono@48 : ?
L2-Stereo
: ?
L2-M128 : ?
G.722 : ?
• Dialog4 Slimline
ZephyrExpress Codec: Compatibility
must be set to Slimline .
Slimline “Configuration /ISDN ac-
cept mode” must be set to ALL and
“Configuration/ISDN mode” to RI.
L3-Mono
: yes+. There will be
dropouts in the MusicTaxi to Zephyr-
Express path because of D4’s asyn-
chronous mode.
L3-Stereo
: yes+, but see above
L2-Mono@48 : ?
L2-Stereo
: ?
L2-M128 : ?
G.722 : yes?
• EELA
L3-Mono : -
L3-Stereo : -
L2-Mono@48 : yes?
L2-Stereo : no?
L2-M128 : no?
G.722 : yes?
• Intraplex
L3-Mono : -
L3-Stereo : -
L2-Mono@48 : yes?