Toshiba B-850 - Manual (Page 99)

APPENDIX 4 SYSTEM MODE EO1-33029
A4.7 Additional Information
A4-23
A4.7 Additional Information
A4.7.1 Self-Diagnostic Test Result Sample and Descriptions
•
Print Sample
•
Descriptions
(1) Program ROM Check (Model Name, Date, Version, Part number, Checksum)
PROGRAM B-850 01NOV2000
V1.0 A FMRM0051402: 1A00
(2) Boot Check (Model Name, Date, Version, Part Number, Checksum)
BOOT B-850 16NOV2000
V1.0 A FMRM0051601: 8500
PROGRAM B-850 01NOV2000
V1.0A
FMRM0051402: 1A00
BOOT B-850 16NOV2000
V1.0 FMRM0051601:8500
FONT 5600
KANJI 8900
EEPROM OK
SDRAM 8MB
CARD SLOT1
ATA
SLOT2 LAN
SENSOR1 00000000, 00000000
SENSOR2 [H]20°C [A]22°C [S]25°C
[R(U)]4.2V [R(L)]4.0V
[T]2.5V
EXP.I/O NG
KEY BRD
NG
NOTES:
1. Print conditions:
Preset count: 1, Print speed: 4”/sec., Sensor: No sensor, Printing method: Thermal transfer,
Supply length: 78 mm, Issue mode: Batch printing
2. Software version No., Part No. of ROM and checksum will vary according to the software version of
PROGRAM ROM.
3. The last two digits of the checksum are usually “00”.
4. When Kanji ROM is not installed, the checksum becomes “0000”.
5. The symbol”°” of ‘°C” may not be printed depending on the type of character code.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Checksum
Part No. of ROM or software
Revision No.: Space or A to Z
Program area
Model name
Software version No.
Checksum of Boot area
Part No. of ROM or software
Revision No.: Space or A to Z
Boot area
Model name
Software version No.