Toshiba B-850 - Manual (Page 97)

APPENDIX 4 SYSTEM MODE EO1-33029
A4.6 PCL Emulation Setting
A4-21
A4.6 PCL Emulation
Setting
(Cont.)
Issue Mode Selection
With this parameter select the Issue Mode for the PCL Emulation.
After selecting the issue mode, press the [PAUSE] key to show the
Media Size Selection menu.
Media Size Selection
With this parameter select the Media Size for the PCL Emulation.
After selecting the media size, press the
[PAUSE] key.
When “A4”, “LEGAL”, or “LETTER” is selected, the display returns to
"<8>PCL EMULATION".
When “USER” is selected, the Media Width Setting menu is displayed.
Media Width Setting
[FEED]
key: Pressing the [FEED] key one time causes a –1 change, up
to 100.
[RESTART] key: Pressing the [RESTART] key one time causes a +1
change, up to 2168.
After selecting the media width, press the
[PAUSE] key to show the
Media Length Setting menu.
0(',$$
0(',$/(*$/
0(',$$
[RESTART]
[FEED]
0(',$/(77(5
0(',$86(5
A4 Size
Legal Size
Letter Size
Customize
>:@>/@
[RESTART]
[FEED]
>:@>/@
7<3(>6@12&87
7<3(>&@:,7+&87
7<3(>6@12&87
[RESTART]
[FEED]
Batch mode with
no cut.
Cut mode.
NOTE:
Cut issue is available only
when the optional cutter
module (B-7208-QM) is
installed. When you need the
cutter, please contact your
nearest TOSHIBA TEC service
representative.
NOTE:
If holding the [RESTART] or
[FEED] key for 0.5 seconds or
longer in the parameter
setting, the key is entered
continuously.
Media width (Unit: 0.1mm)