Toshiba B-850 - Manual (Page 85)

APPENDIX 4 SYSTEM MODE EO1-33029
A4.4 Printer Parameter Fine Adjustment
A4- 9
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
X Axis Fine Adjustment
With this parameter you can fine adjust the print position on X Axis.
When “<3>ADJUST SET” appears, press the
[PAUSE] key 4 times.
[FEED] key: Pressing the [FEED] key one time causes a –0.5mm
change, up to –99.5 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a
+0.5mm change, up to +99.5 mm.
After completing the fine adjustment, press the [PAUSE] key.
;$'-867PP
[RESTART]
[FEED]
;$'-867PP
;$'-867PP
;$'-867PP
;$'-867PP
;$'-867PP
NOTES:
•
The X Axis fine adjustment is
performed to fine adjust the
print position in horizontal
direction (left or right).
•
Adjust the X axis within the
effective print range. After
the value reaches the
coordinate 0, the value
remains unchanged even if
the subsequent fine
adjustment is performed in
the negative direction.
•
This adjustment cannot be
used in the Self Test mode or
Test print.
•
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter. The maximum X
axis fine adjustment value is
±
99.5mm. When the value
reaches the maximum, the
value remains unchanged
even if the subsequent fine
adjustment is performed.
X Axis Fine Adjustment
(Example)