Toshiba B-850 - Manual (Page 41)

3. PRINTER OPERATION EO1-33029
3.4 Using the B-852 Printer Properties Menus
3-14
3.4.3 Details Tab (Cont.)
Capture Additional Printer Ports - When clicking on the Capture
Printer Port . button it will allow the capturing of a port (LPT1~LPT9)
and mapping it to a network drive. When clicking on End Capture ...it
will end the capture, removing the mapping of a port from a network
drive.
Changing Spool Settings - When clicking on the Spool Settings...
button the following screen will appear to allow changing of the spool
settings for the printer driver.
NOTES:
•
Click Capture Printer
Port .
•
In the Device list, click the
printer port desired to be
captured. Type the network
path, and then click
OK .
•
In Print to the following
port , click the port just
mapped.
NOTES:
•
If spooling is turned off it will
become impossible to pause
print jobs.
•
If this printer is a network
printer and spooling is turned
off, then the print offline
•
If problems occur printing
with the EMF option then try
the RAW option.