A4.5 test print (cont.) – Toshiba B-850 User Manual

Page 90

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.5 Test Print

A4-14

A4.5 Test Print (Cont.)

While pressing the

[FEED]

and

[PAUSE]

keys at the same time, turn

on the printer. Hold both keys until the “<1>DIAG. Vx.x” Message
appears.

Press the

[FEED]

key 2 times.

The Test Print is ready to be performed.

Specifying the Print Condition for the Test Print

The print conditions for the Test Print should be specified before
printing. When “<4>TEST PRINT” appears, press the

[PAUSE]

key.

Issue Count Setting
To enter the Issue Count Setting menu, press the

[PAUSE]

key.

After selecting the issue count, press the

[PAUSE]

key to go to Print

Speed Setting.

NOTES:

•

When pressing the

[FEED]

and

[RESTART]

keys at

the same time in the Test
Print menu, the message
returns to “<4>TEST
PRINT”.

•

If holding the

[FEED]

[RESTART]

key for 0.5

seconds or longer in the
Test Print menu, the key is
entered continuously.

•

The fine adjustment
parameters are effective for
the Test Print. (except for X
Axis Fine Adjustment.)

•

If any error occurs, an
error message appears, and
the printer stops printing.
After clearing the errors,
press the

[PAUSE]

key to

return to the System Mode
menu. The printer does not
resume printing
automatically.

•

A changed parameter
becomes enabled by
pressing the

[PAUSE]

key

and is stored in memory
until the printer is turned
off.

35,17&21',7,21

[RESTART]

[FEED]

,668(&2817

!',$*9[[

!7(6735,17

,668(&2817