Connecting, Connecting -14 – Toshiba A40 Series User Manual
Page 178
User's Manual
8-14
O
PTIONAL
D
EVICES
❑
You may not use any copyrighted video or music data copied from a video
camera except for your personal enjoyment.
❑
If you connect/disconnect an i.LINK device to/from another i.LINK device that
is currently exchanging data with the computer, data frames might be dropped.
❑
Make sure data transfer has ended or turn off the computer, before you:
• Connect/disconnect an i.LINK device to/from the computer.
• Connect/disconnect an i.LINK device to/from another i.LINK device that is
connected to the computer.
Connecting
1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394)
cable into the computer.
Figure 8-10 Connecting the i.LINK cable
2. Plug the other end of the cable into the device.
Note the following when you use i.LINK:
❑
You may need to install drivers for your i.LINK devices.
❑
Not all i.LINK devices have been tested, therefore, compatibility with all i.LINK
devices cannot be guaranteed.
❑
Use S100, S200 or S400 cables no longer than three meters.
❑
Some devices might not support standby or automatic off functions.
❑
Do not connect or disconnect an i.LINK device while it is using an application
or when the computer is automatically shutting it down to save power. Data
might be destroyed.