Chapter 7 hw setup and passwords, Hw setup, Accessing hw setup – Toshiba A40 Series User Manual
Page 153: Hw setup window, Hw setup -1, Accessing hw setup -1 hw setup window -1, Hw setup and passwords, If you are going to install, Chapter 7, Explains how to configure the computer using
7-1
HW S
ETUP
AND
P
ASSWORDS
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to configure your
computer and how to set passwords.
HW Setup
TOSHIBA HW Setup lets you configure settings for Display, CPU, Boot Priority,
Keyboard, USB, LAN, General, Password, Device Config and Parallel/Printer.
NOTE: If the supervisor password is set, access to the TOSHIBA HW
Setup program can be prevented when the user password is used to log
on to the computer. Some models are not equipped with Parallel/Printer
tab and/or CPU tab.
Accessing HW Setup
To run HW Setup, click start, click Control Panel, click Printers and other
Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Password, Device
Config, Parallel/Printer, Display, CPU, Boot Priority, Keyboard, USB and LAN.
NOTE: Some models are not equipped with Parallel/Printer and/or CPU
tabs.
There are also three buttons: OK, Cancel and Apply.
OK
Accepts your changes and closes the HW Setup window.
Cancel
Closes the window without accepting your changes.
Apply
Accepts all your changes without closing the HW Setup
window.