6b how to use this manual, N] [o] [p] [q] [r] [s] [t] [u – TOYOTA 2005 CAMRY User Manual

Page 7

[N]

[O]

[P]

[Q]

[R]

[S]

[T]

[U]

2005 CAMRY (EWD586U)

B HOW TO USE THIS MANUAL

Current is applied at all times through the STOP fuse to TERMINAL 2 of the stop light SW.
When the ignition SW is turned on, current flows from the GAUGE fuse to TERMINAL 8 of the light failure sensor, and also flows
through the rear lights warning light to TERMINAL 4 of the light failure sensor.

Stop Light Disconnection Warning

When the ignition SW is turned on and the brake pedal is pressed (Stop light SW on), if the stop light circuit is open, the current
flowing from TERMINAL 7 of the light failure sensor to TERMINALS 1, 2 changes, so the light failure sensor detects the
disconnection and the warning circuit of the light failure sensor is activated.
As a result, the current flows from TERMINAL 4 of the light failure sensor to TERMINAL 11 to GROUND and turns the rear lights
warning light on. By pressing the brake pedal, the current flowing to TERMINAL 8 of the light failure sensor keeps the warning
circuit on and holds the warning light on until the ignition SW is turned off.

S6 Stop Light SW

2–1 : Closed with the brake pedal depressed

L4 Light Failure Sensor

1, 2, 7–Ground : Approx. 12 volts with the stop light SW on

4, 8–Ground : Approx. 12 volts with the ignition SW at ON position

11–Ground : Always continuity

: Parts Location

Code

See Page

Code

See Page

Code

See Page

H17

: Relay Blocks

Code

See Page

Relay Blocks (Relay Block Location)

R/B No.1 (Instrument Panel Brace LH)

: Junction Block and Wire Harness Connector

Code

See Page

Junction Block and Wire Harness (Connector Location)

Instrument Panel Wire and Instrument Panel J/B (Lower Finish Panel)

Instrument Panel Wire and J/B No.3 (Instrument Panel Brace LH)

: Connector Joining Wire Harness and Wire Harness

Code

See Page

Joining Wire Harness and Wire Harness (Connector Location)

IE1

Floor Wire and Instrument Panel Wire (Left Kick Panel)

BV1

Luggage Room Wire and Floor Wire (Luggage Room Left)

: Ground Points

Code

See Page

Ground Points Location

Under the Left Center Pillar

Back Panel Center

: Splice Points

Code

See Page

Wire Harness with Splice Points

Code

See Page

Wire Harness with Splice Points

Cowl Wire

B18

Luggage Room Wire

System Outline

Service Hints