Speaker placement —continued – Onkyo TX-NR1000 User Manual

Page 24

Speaker Placement

—Continued

Main room A: 5.1 ch speaker system including the front speakers connected through the BTL or bi-

amp connections

• For speaker system [A], set the surround back speaker parameters to “BTL for Front ” or “Bi-Amp for Front” and all

the other speaker parameters to “Main A” (For details on speaker connections, see page 27).

• For speaker system [B], set the speaker parameters to “Not Used.”

*When using the BTL or bi-amp connections, you cannot use Zone 2 since the surround back channel is used for the front speakers of
main room A.

Main room A: 7.1 ch from the speaker system [A] and additional subwoofer and surround speakers
from speaker system [B] (suitable for enjoying more powerful and lively surround sound in main
room A); Main room B: two front speakers from speaker system [B] using the BTL or bi-amp

connections

• For speaker system [A], set all the speaker parameters to “Main A.”
• For speaker system [B], set the surround speaker and subwoofer parameters to “Main A,” the front speaker

parameters to “Main B,” and the surround back speaker parameters to “BTL for Front” or “Bi-Amp for Front” (For
details on speaker connection, see page 27).

• When you want to use the surround speakers and subwoofer of speaker system [B] for specific sources, select the

source and set the parameters for these speakers to “B” or “A+B” in the listening mode setup menu.
When you set the parameter to “B,” the audio signal comes out from the surround speakers and subwoofer of
speaker system [B]. When you set the parameter to “A+B,” the signal comes out from the surround speakers and
subwoofer of both speaker systems [A] and [B].

Main room A

1-1.Speaker Config
=====================

Speaker A
a.Front L/R :Main A
b.Center :Main A
c.Surr L/R :Main A
d.Surr Back
:BTL for Front
e.Subwoofer :Main A
Speaker B
f.Front L/R :Not Used
g.Center :Not Used
h.Surr L/R :Not Used
i.Surr Back
:Not Used
j.Subwoofer :Not Used

SBL

SBR

Here is an example of the
multichannel sources.

1-1.Speaker Config
=====================

Speaker A
a.Front L/R :Main A
b.Center :Main A
c.Surr L/R :Main A
d.Surr Back
:Main A 2ch
e.Subwoofer :Main A
Speaker B
f.Front L/R :Main B
g.Center :Not Used
h.Surr L/R :Main A
i.Surr Back
:BTL for Front
j.Subwoofer :Main A

3-5.Multichannel Input
=====================

b.Re-EQ :Off

e.Surr L/R Sp :A+B

g.Subwoofer :A+B

Main room A

Main room B