Onkyo TX-NR1000 - Manual (Page 102)

102
Listening Mode Setup —Continued
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker Configuration
sub-menu differ, the available options will be “A” and
“B.”
A (Default): Outputs the source from the speakers
connected to the SURR BACK L/R SPEAKERS A
terminals.
B: Outputs the source from the speakers connected to
the SURR BACK L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the SURR BACK L/R SPEAKERS A and SURR
BACK L/R SPEAKERS B terminals.
e. Subwoofer
This option configures the subwoofer to use when
playing the source in the Direct or Pure Audio listening
mode. Select the terminal to which the subwoofer you
want to use is connected. This setting can be made when
the “(Speaker A) Subwoofer” is set to an option other
than “Not Used” in the Speaker Configuration sub-menu.
However, when the “(Speaker B) Subwoofer” is set to an
option other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “A” or “Not
Used.”
A (Default): Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT A terminal.
B: Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B: Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used: No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play an analog
multichannel source such as DVD-Audio and Super
Audio CD.
a. SB Mode (5ch)
This option selects the enhancement mode for playback
when you play a 5.1ch analog multichannel source as a
6.1 or higher channel source through the TX-NR1000/
TX-NR5000E. The surround back setting you select here
will be applied to all of the multichannel input signals.
• This option will not appear when the Surr Back
Channel setting in the Audio Assign sub-menu is set
to “SBL/SBR (7.1ch).”
• When the “(Speaker A) Surr Back” is set to “BTL for
Front,” “Bi-Amp for Front,” or “Not Used” in the Speaker
Configuration sub-menu, this option will not be
displayed.
Dolby EX: Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Digital EX mode.
PL IIx Movie (Default): Plays a 5.1ch source as a 6.1
or higher channel source using the Dolby Pro Logic IIx
Movie mode.
• When you set the (Speaker A) Surr Back setting to
“Main A 1ch (SBL)” in the Speaker Configuration
sub-menu, you cannot select “PLIIx Movie.”
PL IIx Music: Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Music
mode.
NEO:6: Plays a 5.1ch source as a 6.1 or higher channel
source using the DTS NEO:6 mode.
Off: Plays an original 5.1ch source as it is.
b. Re-EQ
This option allows you to configure whether the Re-EQ
effect is applied or not when playing an analog
multichannel source such as DVD-Audio and Super
Audio CD. Use this effect when you do not want to
overemphasize the treble sound.
Off (Default): The effect is not applied.
On: Adjusts the soundtrack in which the treble is
overemphasized, so that the sound is optimized for
home theater.
c. Front Speaker
This option configures the front speakers to use when
the TX-NR1000/TX-NR5000E plays an analog multi
channel source such as DVD-Audio and Super Audio
CD. Select the speaker terminals to which the speakers
you want to use are connected. This setting can be made
when the “(Speaker B) Front L/R” is set to “Main A” in
the Speaker Configuration sub-menu.
• When the impedance setting for “Front L/R A” or
“Front L/R B” in the Speaker Impedance sub-menu is
set to “6 ohms” or “4 ohms,” the available options will
be “A” and “B.”
A (Default): Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS A terminals.
B: Outputs the source from the speakers connected to
the FRONT L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the FRONT L/R SPEAKERS A and FRONT L/R
SPEAKERS B terminals. Note that this option is not
available when the front speakers are in Bi-amp or in
BTL configuration.
d. Center Speaker
This option configures the center speaker to use when
the TX-NR1000/TX-NR5000E plays an analog
multichannel source such as DVD-Audio and Super
Audio CD. Select the speaker terminal to which the
speaker you want to use is connected. This setting can
be made when the “(Speaker B) Center” is set to “Main
A” in the Speaker Configuration sub-menu.
• When the impedance setting for “Center A” or
“Center B” in the Speaker Impedance sub-menu is set
to “6 ohms” or “4 ohms,” the available options will be
“A” and “B.”
Multichannel Input Setup Sub-menu