Raymarine Marine GPS System - Manual (Page 78)

RayTech Navigator User’s Guide
4-14
To put a new waypoint at your vessel’s current position:
1. As shown in Figure 4-15, select Place Waypoint at Vessel
from the Waypoint menu, or, click Marks/Wpt at Vessel
on the function bar.
The Waypoint At Vessel information dialog box appears
(Figure 4-16). The dialog box shows the time the waypoint
is added, and has a space where you can type relevant infor-
mation, such as location, water depth and temperature, etc.
2. Type your information into work space (optional), then click
OK to place new waypoint on the chart.
Figure 4-15. Placing A Waypoint At The Vessel’s Current Position
Figure 4-16. Waypoint At Vessel Information Dialog Box