Raymarine Marine GPS System - Manual (Page 60)

RayTech Navigator User’s Guide
3-30
Toolbars Tab
The Toolbars tab of the Customize dialog box enables you to restore
Navigator’s Toolbars to their factory default states, and also allows
you to create and name (and rename) custom Toolbars.
To display the Toolbars tab:
1. From the View menu (or right-click near the Toolbar display
area), select Customize to display the Customize dialog box.
2. Click the Toolbars tab (Figure 3-46).
To reset Toolbars to original default settings:
1. Check the box(es) beside the Toolbar(s) you want to reset
2. Click Reset ; or if you want to reset all the Toolbars at once,
click Reset All .
To create and name a custom Toolbar:
1. Click New . The Toolbar Name dialog box is displayed
(Figure 3-46).
2. Type the name you want for the Toolbar (up to 50 characters)
then click OK . The new Toolbar appears in the Toolbar
window and also appears on the screen.
To rename a custom Toolbar:
(Only Toolbars that you have created can be renamed or deleted.)
1. Click Rename . The Toolbar Name dialog box is displayed
(Figure 3-46).
2. Type the new name you want for the Toolbar (up to 50
characters) then click OK . The new Toolbar appears in
the Toolbar window and also appears on the screen.