Raymarine Marine GPS System - Manual (Page 164)

Advanced Navigator Functions
5-73
3. Select a gauge, then decide whether you want the gauge
displayed by clicking Enabled . Next, select the setting(s)
you want that gauge to display. In Figure 5-24, the tachometer
has been enabled, and the range has been set to a 6000 RPM
maximum.
4. Repeat Step 3 for all gauges you want displayed on the panel.
5. Click the Panel tab. As shown in Figure 5-26, the
checkboxes on the Panel tab allow you to:
•
Display gauge sets for one or two engines.
•
Set the panel to appear above any other currently
displayed Navigator screens if any engine-related alarms
are generated.
•
Set the display style of the gauges. If you select Classic
Style Dials , gauges with white lettering on a black
background are displayed. If you leave the checkbox
empty, gauges with black lettering on a white
background are displayed.
Click the checkboxes you want, then click OK .
Figure 5-26. Engine Panel Setting Screen Showing Panel Tab