Raymarine Marine GPS System - Manual (Page 145)

RayTech Navigator User’s Guide
5-54
Data Tests Screen
To enter values into the Data Tests screen, do the following:
1. On the Polars screen, click the Data tab. The Data Tests
screen is displayed (Figure 5-15). This screen initially
contains a single row of test data; however, you can store
and edit as many different test data rows as you need,
each row representing a unique run and its associated
performance statistics.
Figure 5-15. Data Tests Screen
Double-click data row to display corresponding
Test Parameters screen (Figure 4)
Click Filters to restrict the display of test
data rows to those matching your criteria
Highlight data row, then click
Delete to remove it from the list
Click
Clear Filters to remove
applied filters from data row