Raymarine Marine GPS System - Manual (Page 110)

Advanced Navigator Functions
5-19
Changing the Target Display
The Pathfinder PLUS Radar allows you to improve target visibility
by changing the following:
•
Interference rejection ( In Rej )
•
Target expansion ( Expansion )
•
Target wakes ( Wakes )
These controls are accessed from the Functionbar Targets Button.
To change target mode settings:
1. Click the Targets button.
2. Click In Rej to toggle On/Off.
3. Click Expansion to toggle On/Off.
4. Click Wakes to select Off, Short, Medium, or Long wakes.
5. Click Clear Wakes to remove wakes from the screen.
You can use the buttons to change the settings of any or all the modes.
The top screen status bar updates to indicate which controls are on.