Ricoh 3245 - Manual (Page 93)

When the {Facsimile} Key Is Lit in Red
85
5
When the
{{{{Facsimile}}}} Key Is Lit in Red
If this key is lit, press the key to enter the facsimile mode. Then, refer to the table
below and take the appropriate action.
Problem Solutions
The paper output tray is full. Remove the paper from the tray.
A facsimile error has occurred. The facsimile has a problem. Contact your ser-
vice representative. See p.87 “Error Messages
and Their Meanings” The copier will still func-
tion normally.
Out of paper Add more paper.
“Loading Paper”, General Settings Guide
A network error has occurred. • Check the displayed message. See p.87 “Er-
ror Messages and Their Meanings”.
• Check the machine is correctly connected
to the network, and the machine is correct-
ly set. See Network Guide.
• Consult your network administrator.
• When the key is still lit in red even if you
take the measures above, please contact
your service representative.
AAG013S
JupterC2_Fax_EN-F_FM.book Page 85 Tuesday, November 30, 2004 2:47 PM