Ricoh 3245 - Manual (Page 39)

Scan Settings
31
2
❒ When using Internet Fax transmis-
sion, documents are sent at “De-
tail” resolution, even if you have
specified “Fine”. To send a docu-
ment at “Super Fine” or “Fine”,
configure the Full Mode when reg-
istering the destinations in the Ad-
dress Book. See p.55 “T.37 Full
Mode”.
AAAA
Press [Resolution].
BBBB
Select the resolution you require,
and then press [OK].
Note
❒ If you install the optional ex-
pansion memory, “Super Fine”
will be displayed in the Resolu-
tion box.
Original Type
If your original contains photo-
graphs, illustrations, or diagrams
with complex shading patterns or
grays, select the appropriate original
type to optimize image clarity.
❖ ❖ ❖ ❖ Text
Select [Text] to send high-contrast
black-and-white image originals.
Use this setting even if your origi-
nal contains text and photographs,
or if you only want to send clearer
text.
❖ ❖ ❖ ❖ Text / Photo
Select [Text / Photo] to send an orig-
inal containing both a high-con-
trast black-and-white image, such
as text, and a halftone image, such
as a photograph.
❖ ❖ ❖ ❖ Photo
Select [Photo] to send an original
containing a halftone image, such
as a photograph or a color original.
Note
❒ If you select [Text / Photo] or [Photo],
the transmission will take longer
than when [Text] is selected.
❒ If you send a fax message with
[Text / Photo] or [Photo] and the
background of the received image
is dirty, reduce the density setting
and resend the fax. See p.32 “Im-
age Density (Contrast)”.
❒ You can set the original type that is
selected right after the machine is
turned on or modes are cleared,
with [Original Type Priority] under
Gen. Settings/Adjust. See p.144
“General Settings/Adjustment”,
Facsimile Reference tures> .
JupterC2_Fax_EN-F_FM.book Page 31 Tuesday, November 30, 2004 2:47 PM