Before the original is scanned, While the original is being scanned, While the original is being transmitted – Ricoh 3245 User Manual

Page 31

Canceling a Memory Transmission

Canceling a Memory Transmission

You can also cancel the mode using
the same procedure in the following
cases:
• Fax Destination, Internet Fax Des-

tination, and IP-Fax Destination
are specified simultaneously.

• Only either Internet Fax Destina-

tion or IP-Fax Destination is speci-
fied.

Before the Original Is Scanned

Use this procedure to cancel a trans-
mission before pressing the

{{{{Start}}}}

key.

AAAA

Press the

{{{{Clear Modes}}}} key.

Note

❒ When documents are placed in

the ADF, you can cancel trans-
mission simply by removing
them.

While the Original Is Being
Scanned

Use this procedure to cancel a trans-
mission after pressing the

{{{{Start}}}} key.

AAAA

Press the

{{{{Clear/Stop}}}} key.

The machine stops scanning.

Note

❒ You can also cancel scanning by

pressing [Stop Scanning].

❒ Scanning may be completed

while you are performing the
cancel operation.

While the Original Is Being
Transmitted

Note

❒ If the transmission finishes while

you are carrying out this proce-
dure, it will not be canceled.

❒ If you cancel a message while it is

being sent, the transmission is halt-
ed as soon as you finish the cancel-
lation procedure. However, some
pages of your message may have
already been sent and received at
the other end.

ZLBS050N

JupterC2_Fax_EN-F_FM.book Page 23 Tuesday, November 30, 2004 2:47 PM