beautypg.com

2confirming transmission, Confirming on display, Confirming by report – Ricoh 3245 User Manual

Page 37: Confirming by e-mail

background image

Confirming Transmission

29

2

Confirming Transmission

You can confirm transmission on the
display, by report, or by e-mail.

Confirming on Display

Use the TX File Status. See p.31
“Checking the Transmission Result
(TX File Status)”, Facsimile Reference
.

Confirming by Report

Print an Immediate TX Result Report
for confirmation.

Memory Transmission

If a document cannot be sent, a Com-
munication Failure Report is auto-
matically printed. Or, you can use the
Communication Result Report to
check each transmission result re-
gardless of status.
This report is printed each time a
Memory Transmission is completed if
you turn this report on with User Pa-
rameters. See p.166 “User Parame-
ters”, Facsimile Reference Features> (switch 03, bit 0).
If you turn the Communication Re-
sult Report on, the Communication
Failure Report is not print. See p.82
“Communication Failure Report”,
Facsimile Reference tures> . See p.81 “Communication Re-
sult Report (Memory Transmission)”,
Facsimile Reference tures> .

Immediate Transmission

You can confirm the result with an
Immediate TX Result Report.
Select to print this report in User Pa-
rameters. A report is printed after ev-
ery Im m e d iat e Tr ans m iss ion is
completed. See p.166 “User Parame-
ters”, Facsimile Reference Features> (switch 03, bit 5).
See p.82 “Immediate TX Result Re-
port (Immediate Transmission)”, Fac-
simile Reference
.

Confirming by E-mail

Use the E-mail TX Results function, to
send the contents of Communication Re-
sult Report and Immediate TX Result
Report as a Journal by e-mail to your PC.
You must set this function for each
communication.

Note

❒ You can use the Sender Settings

function to send the contents of
Communication Result Report and
Immediate TX Result Report as a
Journal by e-mail to a specified us-
er. See p.5 “Sender Settings”, Fac-
s i m i l e R e f e r e n c e < A d v a n c e d
Features>
.

Reference

The user code and e-mail address
of the destination must be regis-
tered in the Destination List. See
“Fax Destination”, General Settings
Guide
.
E-mail TX Results must be pro-
grammed in a Quick Operation
k e y . S e e p. 14 4 “ G e n e ra l S e t -
tings/Adjustment”, Facsimile Ref-
erence
.

JupterC2_Fax_EN-F_FM.book Page 29 Tuesday, November 30, 2004 2:47 PM