Ricoh 3245 - Manual (Page 15)

Control Panel
7
1
22. {{{{Clear/Stop}}}} key
Clear:
Cancels entered numbers or characters.
Stop:
Interrupts the current operation (trans-
mission, scanning, copying, or printing).
23. {{{{Start}}}} key
Press to start faxing, or printing reports,
or lists.
Reading the Display
The display guides you through operations, shows messages, you machine sta-
tus, and destinations registered in the destination lists. See “Fax Destination”,
General Settings Guide.
If you press the
{{{{Facsimile}}}} or {{{{Clear Mode}}}} key during operation, this machine
enters fax standby mode.
Each function name displayed acts as a selection key, which you can touch to se-
lect or specify the function.
When a function is selected or specified, the function name is highlighted like
this
. When a function cannot be selected or specified, the function
name is grayed out like this .
Note
❒ This machine automatically returns to standby mode if you do not use the
machine for a certain period of time. You can select the period using the Fac-
simile Auto Reset Timer. See “Timer Settings”, General Settings Guide.
❒ You can have the machine return to default mode after each transmission us-
ing [Scan End Reset] under Gen. Settings/ Adjust. See p.144 “General Set-
tings/Adjustment”, Facsimile Reference .
JupterC2_Fax_EN-F_FM.book Page 7 Tuesday, November 30, 2004 2:47 PM