Ricoh 3245 - Manual (Page 41)

Scan Settings
33
2
B Press [i i i iLighter] or [Darkerj j j j] to
adjust the density.
The square moves.
Combined Auto and Manual
Image Density
A Select the [Auto Image Density].
B Press [i
i i iLighter] or [Darkerj j j j] to
adjust the density.
The square moves.
Mixing Scan Settings for a
Multiple Page Original
When sending an original of several
pages, you can select a different im-
age density, resolution, and original
type setting for each page.
Place the original, select the scan set-
tings for the first page, dial, and then
press the
{{{{Start}}}} key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
be placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
Note
❒ While the machine is beeping, you
have about 60 seconds (10 seconds
for Immediate Transmission) to se-
lect density, resolution, and origi-
nal type. The remaining time is
shown on the display.
AAAA
Check which pages you want to
scan with different settings.
BBBB
Remove the previous page and
place the next page.
CCCC
Select the image density, resolu-
tion, and original type.
JupterC2_Fax_EN-F_FM.book Page 33 Tuesday, November 30, 2004 2:47 PM