Ricoh 3245 - Manual (Page 45)

Specifying a Destination
37
2
AAAA
Press to switch the destina-
tion to e-mail address.
BBBB
Press [Manual Input].
Note
❒ Depending on security settings,
[Manual Input] may not be dis-
played , and be unable to input.
CCCC
Enter the e-mail address destina-
tion and then press [OK].
Note
❒ If you enter an incorrect charac-
ter, press [Backspace] or [Delete
All]
. Then, re-enter the charac-
ters correctly.
❒ To change the e-mail address af-
ter pressing [OK], press [Edit
Dest.]
, re-enter an e-mail ad-
dress, and then press [OK].
Reference
“Entering Text”, General Set-
tings Guide
The destination is specified.
Note
❒ Press [ProgDest] in this order to
store the entered e-mail address
in the address book. See p.39
“Registering Entered Destina-
tions to the Address Book”.
Entering an IP-Fax Destination
When using IP-Fax transmission,
specify the IP-Fax destination (IP ad-
dress, host name, or alias telephone
number) in place of the fax number.
See p.69 “IP-Fax Function”.
Note
❒ You can enter up to 128 characters.
AAAA
Press to switch the destina-
tion to IP-Fax destination.
JupterC2_Fax_EN-F_FM.book Page 37 Tuesday, November 30, 2004 2:47 PM