Roland RG-1 - Manual (Page 87)

85
Error Messages
Indication Meaning
Error 01: You can only read the music file. It can not be saved.
Error 02:
An error occurred during writing. The storage media’s protect tab may be in the “Protect” (writing prohib-
ited) position, or the storage media may not yet be initialized.
Error 10: No storage media is inserted. Insert the storage media and try again.
Error 11:
There is not sufficient free memory in the save destination.
Either insert other storage media or delete unneeded files and try again.
Error 14:
An error occurred during writing.
The storage media may be corrupted. Insert other storage media and try again.
Alternatively, you can initialize the storage media.
Error 15:
The file is unreadable.
The data format is not compatible with the RG-1.
Error 16:
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [
] button again.
Error 30: The internal memory capacity of the RG-1 is full.
Error 40:
The RG-1 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the RG-1.
Error 41:
A MIDI cable has been disconnected.
Connect it properly and securely.
Error 43:
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
Error 51:
There may be a problem with the system. Repeat the procedure from the beginning.
If it is not solved after you have tried several times, contact the Roland service center.
Error 65:
The External memory connector was subjected to excessive current.
Check the storage media to confirm that no damage has occurred to it.
RG-1_e.book 85 ページ ２００８年４月８日 火曜日 午後２時３６分