Roland RG-1 - Manual (Page 65)

63
Recording the Performance
Start Recording
8
Press the [ENTER] button or play the keyboard to start recording.
When you press the [Enter] button, a two-bar count is sounded, and then
recording starts.
When you start recording by fingering the keyboard, no count-in is
sounded.
Recording starts, and the following screen appears.
The text “Recording...” flashes while recording is in progress.
fig.04-030d
Stopping Recording
9
Press the [Enter] button.
Recording stops.
The following screen appears.
fig.04-040d
1
Press the [ ] button.
You will hear the recorded performance.
Once again press the [ ] button, and playback will stop.
Play Back the Recorded Performance
You can save your
recorded performances to
the RG-1 itself (p. 64).
If you see the following...
If you attempt to select a song when another performance has already been recorded,
the following appears in the display.
fig.04-050d
If it is OK to erase the performance, press the [Enter] button.
If you do not want to erase the performance, press the [Function] (Exit) button and
carry out the operation in “Saving Recorded Performances” (p. 64).
RG-1_e.book 63 ページ ２００８年４月８日 火曜日 午後２時３６分