Roland RG-1 - Manual (Page 82)

80
Connecting External Devices
1. Turn the volume all the way down on the RG-1
and on the audio device you’re about to connect.
2. Turn off the power to the RG-1 and the audio
device.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the connected audio device.
5. Switch on the RG-1.
6. Adjust the volume level on the RG-1 and the
connected audio device.
The sounds from the connected audio device are played
by the RG-1.
Adjust the volume by using the controls of your audio
device.
Turning Off the Power
1. Turn the volume all the way down on the RG-1
and on the connected audio device.
2. Turn off the RG-1.
3. Turn off the connected audio device.
Playing Sounds of an Audio Device through the RG-1
Audio System, etc.
RG-1_e.book 80 ページ ２００８年４月８日 火曜日 午後２時３６分