beautypg.com

P. 27 – Roland RG-1 User Manual

Page 29

background image

27

Performance

You can adjust the damper noise of the acoustic piano sound (the sound of
the damper releasing the strings when you press the damper pedal).

1

Press the [Function] (Exit) button, getting its indicator to light.

2

Press the [Song] (Select -) button or [

] (Select +) button to

select “Damper Noise” in the RESONANCE screen.

fig.03-100d

3

Press the [

] (Value -) or [

] (Value +) button to change the

value.

4

Press the [Function] (Exit) button so the indicator goes out.

Adjusting the Sound Heard at String Release When the
Damper Pedal is Depressed (Damper Noise)

Value

Description

Off, 1–10

Larger values produce correspondingly greater damper noise.
The Damper Noise function is not active when the value is set
to “Off.”

You can save this setting in
the RG-1’s memory using the
Memory Backup function
(p. 71).

NOTE

• This setting is enabled

only with the piano tones.
You cannot set this for
other tones.

• This setting is ignored

when Damper Resonance
is set to “Off.”

RG-1_e.book 27 ページ 2008年4月8日 火曜日 午後2時36分