Roland RG-1 - Manual (Page 31)

29
Performance
When you play the keys on an acoustic piano, the strings that are already
playing resonate as well. The function that reproduces this effect is called
“String Resonance.”
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to
select “String Resonance” in the RESONANCE screen.
fig.03-100d
3
Press the [ ] (Value -) or [ ] (Value +) button to change the
value.
4
Press the [Function] (Exit) button so the indicator goes out.
Producing the Resonance of the Strings When the Keys
Are Played (String Resonance)
Value Description
Off, 1–10
The resonance level decreases as the value is decreased, while
increasing the value increases the amount of resonance.
The String Resonance function is not active when the value is
set to “Off.”
You can save this setting in
the RG-1’s memory using the
Memory Backup function
(p. 71).
NOTE
This setting is effective only
for some tones.
Refer to “Tone List” (p. 86).
RG-1_e.book 29 ページ ２００８年４月８日 火曜日 午後２時３６分