Roland RG-1 - Manual (Page 69)

67
Changing Various Settings
You can make a wide variety of settings that make the
instrument even easier to use.
The screen in which the settings are changed is called the
“Function screen.”
You can make the settings described below.
If you turn the keyboard’s touch sensitivity (Key Touch:p. 34)
“Fix,” all notes will sound at a fixed loudness regardless of
how strongly you play the keyboard. The setting described
below specifies the loudness in this case.
* The setting screen is displayed only when Key Touch is set to
“Fix.”
→ You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1. Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [ ] (Select
+) button to select “Fixed Velocity” in the
KEYBOARD screen.
3. Press the [ ] (Value -) button or [ ] (Value
+) button to set the loudness of the sound.
4. Press the [Function] (Exit) button so the indicator
goes out.
Making Detailed Settings
Setting Page
Changing the Velocity When the Key Touch is Set
to “Fix”
p. 67
Adjusting the Sound to Achieve the Preferred Tone
Quality (Equalizer)
p. 68
Specifying What the Transpose will Affect (Trans-
pose Mode)
p. 69
Assigning Functions to Pedals p. 69
Changing the Song Playback Method (Play Mode) p. 70
Changing the Parts Assigned to the Track During
SMF Playback (Track Assign)
p. 71
Remembering the Settings Even When the Power is
Turned Off (Memory Backup)
p. 71
Using the V-LINK Function p. 72
MIDI Transmit Channel Settings p. 72
Preventing Doubled Notes When Connected to a
Sequencer (Local Control)
p. 73
Sending Recorded Performance Data to a MIDI De-
vice (Composer MIDI Out)
p. 74
Making the Settings for the USB Driver p. 74
Changing the Communication Settings for USB
Memory (External Memory Mode)
p. 75
Switching the Muted Part (Accompaniment Track
Assign)
p. 75
Switching VIMA CD-ROM Recommended Tones p. 76
Initializing the User Memory, USB Memory, and
Floppy Disks
p. 76
Restoring the Factory Settings (Factory Reset) p. 77
Changing the Velocity When the
Key Touch is Set to “Fix”
Value
0–127
RG-1_e.book 67 ページ ２００８年４月８日 火曜日 午後２時３６分