Roland TD-6V User Manual

Page 97

Chapter 7 Making the MIDI Settings (SETUP/MIDI, BULK DUMP)

Automatically Switching Instrument

Settings Screens (Note Chase)

Note Chase

is a function in which a pad is selected either by

striking the pad or when MIDI data corresponding to that pad
is received.
When set to “OFF,” the pad’s settings screen is prevented
from switching, even when MIDI data for a pad is received.
Here, the trigger input number appears in brackets ([ ]).
If you want to set other pads with this setting remaining at
“OFF,” you can switch settings screens by holding down [SHIFT]

and pressing [

] or [

] to select the trigger input number.

fig.07-008_50

Note Chase: OFF, ON

You can use only the TOM2 rim or AUX, and only the TOM3
rim or TOM4. You cannot select the trigger input for any pad
for which the trigger type has not been set.
Also refer to “Connecting Two Pads to Trigger Input 5/6
(TOM2/AUX) and 7/8 (TOM3/4)” (p. 70).

When Using as MIDI Controller for

External MIDI Device Only (Local Control)

This setting is required when you wish to record your pads and
internal sequencer performance on an external MIDI sequencer.
The performance data from the pads and internal sequencer,
rather than being sent directly to the sound module section (Local
Control Off), is first sent to the external sequencer, and then on to
the TD-6V’s sound module.

fig.07-009.e

• The settings screen does not appear in GM mode.

• If you make connections and record as shown, with a

setting of Local On, duplicate notes will be re-transmitted
to the TD-6V and will not be played correctly.

fig.07-010_50

LocalControl (Local Control): OFF, ON

OFF:

The pads and internal sequencer are disconnected from the
TD-6V’s internal sound generator. Striking the pads does not
cause sound to be produced by the internal sound generator.

ON:

The pads and internal sequencer are connected to the TD-6V’s
internal sound generator. Sounds are produced by the internal
sound generator when the pads are struck.

Pad

Internal Sound Generator

TD-6V

OUT/THRU

Trigger Input

OUT

Internal

Sequencer

Trigger MIDI

Converter

External MIDI Sequencer

LocalControl:

OFF

TD-6KV_e.book 97 ページ２００５年１月２４日　月曜日　午後７時４分