Roland TD-6V - Manual (Page 100)

100
Chapter 7 Making the MIDI Settings (SETUP/MIDI, BULK DUMP)
While in GM mode, “ ” appears in the drum kit screen.
fig.07-015aai
fig.07-015_50
GM Mode: OFF, ON
Preventing the TD-6V from
Switching to GM (General MIDI)
Mode
(Rx GM ON)
This setting prevents the TD-6V from switching to GM mode,
even when a “GM System ON message” is received from an
external MIDI device.
fig.07-016_50
RX GM ON: OFF, ON
OFF:
Even when a “GM System ON message” is received, the TD-
6V does not switch to GM mode. If you wish to switch to GM
mode, follow the procedures described on foregoing
paragraph to switch manually.
ON:
When a “GM System ON message” is received, the TD-6V
switches to GM mode.
Mixing MIDI Signals Coming to the
MIDI IN with Real Time Performance
on the Pads (Soft Thru)
This setting causes data (except for System Exclusive
messages) received at MIDI IN to be output from the MIDI
OUT/THRU connector along with the pad and sequencer
performance data.
fig.07-016a.e
If this setting is not used, leave it “OFF” as the trigger
response of the pads will be faster.
fig.07-017_50
Soft Thru: OFF, ON
OFF:
Only pad and sequencer performance data is output from the
MIDI OUT/THRU connector.
ON:
Data received at MIDI IN is output together with the pad and
sequencer performance data from the MIDI OUT/THRU
connector.
GM System On Message
This is a message which switches a device to an operating
mode that is compatible with the GM system, or to
initialize a sound generator so that it will be compatible
with the GM system.
When “RX GM ON” is set to “OFF,” the GM System ON
message is ignored.
External MIDI Sequencer
TD-6V
Pad
Soft Thru: ON
MIDI Compatible Pad
OUT/THRU OUT IN
Trigger
Input
TD-6KV_e.book 100 ページ ２００５年１月２４日 月曜日 午後７時４分