Roland TD-6V - Manual (Page 35)

35
About the Pads
Setup Guide
■
Recommended Parameters for the Pads
The trigger parameters (except the Xtalk Cancel) are automatically set to the most efficient
values for each pad when you select the trigger type.
The trigger parameters should be adjusted as necessary to match the actual state of your
configuration, and the environment in which it is being used. Make settings for the
parameters as needed (Basic Trigger Parameters: p. 71; Advanced Trigger Parameters: p.
73).
The “Xtalk Cancel (Crosstalk Cancel)” value does not change when the trigger type is
changed. It should be adjusted as necessary to match the actual state of your configuration
and the environment in which it is being used (SETUP/TRIG BASIC/Xtalk Cancel; p. 73).
• Use the “RT-7K,” “RT-5S,” or “RT-3T”setting when you use acoustic drums to sound
the TD-6V. For details refer to “Using the TD-6V with Acoustic Triggers” (p. 75).
Pad Trigger Type
Pad PD-8 PD-8
PD-6 PD Type
PD-7
PD-9
RP-2
PD-80R
PD-80
PD-80R
PD-85
PD-100
PD-120
PD-120
PD-105 PD-125
PD-125
Kick Trigger Unit KD-8 KD-8
KD-7 KD Type
KD-80
KD-85
KD-120
Cymbal CY-8 CY-8
CY-6 CY Type
CY-12H
CY-12R/C
CY-14C
CY-15R
Acoustic Drum Trigger RT-7K RT-7K
RT-5S RT-5S
RT-3T RT-3T
Rim Rim Edge RIM
TD-6KV_e.book 35 ページ ２００５年１月２４日 月曜日 午後７時４分