Viewing configuration summary – RAD Data comm TDMoIP Gateway IPmux-16 User Manual
Page 69

IPmux-16 Installation and Operation Manual
Chapter 3 Operation
Configuring IPmux-16
3-37
IP ToS
Main Menu
↓
2. Configuration
↓
2. System
Configuration
↓
1. IP ToS
➤
To set the IP ToS (Type of Service):
• Type 4 (IP ToS) in the VLAN & IP Support menu.
Your setting will set the IP ToS field in the IP frames transmitted by the
device.
• Enter the IP ToS (Type of Service) to be assigned to this channel, 0-255.
Default configuration: 0
ToS configuration configures the WHOLE byte.
IPmux-16 allows you to configure the WHOLE ToS byte field, since different
vendors may use different bits to tag packets for traffic prioritization. The user can
also configure VLAN priority bits for Level 2 Priority.
ToS assignment applies to all TDM packets leaving IPmux-16.
Viewing Configuration Summary
Main Menu
↓
2. Configuration
↓
6. Configuration
Summary
➤
To view Configuration Summary:
• Type 2 (Configuration) in the Main menu.
• Type 6 (Configuration Summary) in the Configuration menu.
The Configuration Summary screen allows you to view summary information of all
existing bundle connections (Figure 3-34).
CONFIGURATION SUMMARY
Bund Dst Dst IP/Next Hop TDM/Jitter Assigned TS Usage
+----+-----+-----------------+------+---------------+----+
1 | 1 | 192.168.100.2 | 48 | 1, 2, 3,4, 5, |
| | | | | 1.95
| | 0 .0 .0 .0 | 300 | CAS + CRC | %
+----+-----+-----------------+------+---------------+-----+
2 | 2 | 192.168.100.3 | 48 | 10,11,12 |
| | | | 13,14,15 | 2.34
| | 0 .0 .0 .0 | 300 | CAS + CRC | %
+----+-----+-----------------+------+---------------+-----+
Press ESC to exit.
Figure 3-34. Configuration Summary Screen