RAD Data comm TDMoIP Gateway IPmux-16 - Manual (Page 42)

Chapter 3 Operation IPmux-16 Installation and Operation Manual
3-10 Configuring IPmux-16
Ping
Main Menu
↓
1. System
↓
4. Ping
This option enables the user to ping other network devices for diagnostic
purposes.
➤ To ping:
• Type 4 (Ping) in the System Menu.
Enter the destination IP address.
• Press the <Spacebar> to set the number of ping repetitions.
• Press <Enter> to apply the settings.
PING
Enter Destination IP And Press Enter.
Destination IP: 111.123.112.215
Use Space Bar To Choose Ping Repetitions.
Ping Repetitions: 1
Ping Result: Host 192.115.70.13 Request Timed Out.
Press Esc. to Exit, Or Any Other Key To Refresh Screen
Figure 3-9. Ping Dialog Box
3.7 Configuring IPmux-16
➤ To access the Configuration menu:
• Type 2 (Configuration) in the Main Menu.
Main Menu
↓
2. Configuration
From the Configuration menu you can view and configure the following options:
1. General Configuration
Configure Host IP, Default Gateway,
Management Configuration, ASCII
Terminal Configuration, Time/Date
update, Default parameters, and
download software updates
2. Physical Layer Configuration Configure E1/T1 and Eth physical layer
configuration
3. Time Slots Configuration Configure bundles and assign timeslots
4. Bundle Connection Configuration Configure connection parameters