RAD Data comm TDMoIP Gateway IPmux-16 - Manual (Page 49)

IPmux-16 Installation and Operation Manual Chapter 3 Operation
Configuring IPmux-16 3-17
Table 3-2. IPmux-16 Alarms (Cont.)
Alarm ID Alarm Description Trap Sent to NMS Dry Contact
21 Far End Block Error (FEBE Line Layer) Alarm FEBE
1.3.6.1.4.1.164.6.1.3.0.12
Major
26 Local Connectivity Fail Local Conn Status Trap
1.3.6.1.4.1.164.6.1.3.0.13 Minor
27 Remote Connectivity Fail Remote Conn Status Trap
1.3.6.1.4.1.164.6.1.3.0.14 Minor
All other Alarms are unused.
ASCII Terminal Configuration
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
2. ASCII Terminal
Config .
➤ To configure the ASCII terminal
• Type 2 (ASCII Terminal Config.) in the General Configuration menu.
ASCII Terminal Configuration
1. Display Mode Color
2. Baud Rate [bps] 19200
3. Change Password
4. Hard flow ctrl (RTS/CTS) Off
ESC. Exit
Select item from the menu:_
Figure 3-18. The ASCII Terminal Configuration Menu
Display Mode: Color / MonoChrome 3 color / MonoChrome 2 color
Baud Rate 9600 / 19200 / 38400 / 57600 – in units of bps
Default: 19200
Change Password Choose this option to enter a menu that allows the
user to change the current password
Hard flow ctrl Set the 15 minute timeout to On or Off
When On the terminal will exit to the password screen
if no characters were sent by the terminal for
15 minutes.